Service hotline
+86 0755-83975897
Release date:2021-12-28Author source:KinghelmViews:947
Reading Guide: as an important internal equipment of GPS signal, GPS orientation module enterprises play an important role, but the design specifications of orientation module are different for different equipment, and many problems need to be considered in the process of specific selection. So how to select this orientation module? Which is qualified?
1、 The selection depends on the working frequency of the module
For the GPS orientation module, its main function is to determine the location of the equipment and determine the location of the equipment by sending out different frequency bands. Therefore, when selecting the directional module, we should first look at the working frequency of the module and determine its working performance through the working frequency. If you have high requirements for working performance, you should pay special attention to those suitable for you when selecting modules.
2、 View the center point of the module
When selecting the GPS orientation module again, the center point of a certain block shall be determined, because this center point is the circle point for positioning the whole equipment, and the position of this center point represents the center position of the equipment. If there are certain requirements for the position of the equipment, special attention shall be paid when selecting the module again.
3、 Make sure there is no resistance around
When selecting the GPS orientation module, it is necessary to eliminate the influence of external factors on its work. Therefore, when selecting this equipment, it is usually necessary to make sure that there is no influence of external resistance around it. If there is resistance, it is necessary to remove the resistance. Ensure that the directional module is not affected by resistance during operation and give full play to its performance.
Among the daily choices,GPS orientation moduleThere are many bases for selection, so in the actual selection process, we should determine the most suitable products according to our actual needs.
Copyright © Shenzhen Kinghelm Electronics Co., Ltd. all rights reservedYue ICP Bei No. 17113853